Product Details

Technical Specifications

Product ModelS-AG38
Battery Capacity3.7V/400mAh
Support SystemWindows(7/8.1/10/11) 64bit
Android 8.0 above
iOS 13 above
Support ConsolePS4, PS3
TriggerAnalog triggers
JoystickAnalog stick
Controller size- Length: 150 mm / 5.9 inch
- Height: 100 mm / 4 inch
- Width: 60 mm / 2.4 inch
Controller weight 150g / 0.33 lb
USB Cable 0.8 m / 2.6 ft USB C to USB A
ColorBlack

Connect Devices

Connection MethodsCombination keysLED indicator
Android System“A”+“MODE”LED 4 Flashes
iOS System"B"+"MODE"LED 4 Flashes
PS3/PS4/Android TV"SELECT"+"MODE"LED 2 Flashes
Windows PCs/Laptop via 2.4G“LB”+“MODE”LED1+LED2 Flashes

AG38 User Manual - EN/SP

View Now

【Connect the 2.4G USB Dongle to your PC】
With the controller off, press the LB + MODE buttons for 3 seconds.
after 5 seconds, the controller should connect to the PC.
Press SELECT + Start buttons to switch between D-input and X-input mode.

Connect the 2.4G USB Dongle to your PC.
With the controller off, press the LB + MODE buttons for 3 seconds.
after 5 seconds, the controller should connect to the PC.
When properly connected, the first and second LED should remain lit.
Press SELECT + Start buttons to switch between D-input and X-input mode.

【Connecting with cables】
Connect the switched off controller to the PC via USB. The controller will connect automatically
and the 1 LED will light up.
Connecting with 2.4G USB Dongle
X-input Connection

1. With the controller switched off.
2. hold the “A” button along with the “MODE” buttons until the LED indicators flash rapidly, after a period of blinking slowly.
3. In the Bluetooth settings of your phone, connect the controller to your device.
4. When properly connected, 1 LED indicator on the controller should remain on.
5. You must download “Shootingplus V3” to map buttons for different games.

1. With the controller off, first press the “B” button and then the “MODE” button until the LED indicators switch from slow to fast flashes.
2. You can release the buttons now, in the Bluetooth settings of your phone, connect the controller to your device.
3. When properly connected, the 4 LED on the controller should remain lit.

1. Connect the 2.4G USB adapter to your device.
2. With the controller off, tap the “SELECT” button first, then the “MODE” button, and then release both buttons.
3. After 5 seconds, the controller should connect to the device. When properly connected, the 2 LEDs should remain on.

The controller will start when you press the HOME button or connect to computer by USB cable. lf it cannot stop, After working for a long time, please plug the USB cable into the computer and then pull it out, thus it will be power off.

Please disconnect when stop playing with the controller, then it turns off automatically. lf the LED light remains on; it may be because it’s still Bluetooth connect, You can press and hold “Home” button, after 5 seconds, LED turn off.

How to turn on/off ?

The controller will start when you press the HOME button or connect to computer by USB cable. lf it cannot stop, After working for a long time, please plug the USB cable into the computer and then pull it out, thus it will be power off.

Please disconnect when stop playing with the controller, then it turns off automatically. lf the LED light remains on; it may be because it’s still Bluetooth connect, You can press and hold “Home” button, after 5 seconds, LED turn off.

Sleep mode of the controller

The controller has a sleep function. If you do not press any button within 5 minutes, it will automatically sleep. When you press the “MODE” button, the controller and the connected game console will automatically wake up.
Please note that when the controller is low on power, joystick drift, button delay and other problems are prone to occur. Please make sure to keep the controller fully charged.